Operation
56
Drying
The additional “Drying” function accelerates the drying process at the
end of the program.
When the drying function is activated and the door is closed, the dry-
ing system feeds heated and HEPA-filtered air into the wash chamber
for active drying of the load. The heated air is discharged through the
steam condenser and can be cooled down if necessary (see “Addi-
tional settings/Air cooling”).
The drying function can be preselected for all programs with a drying
phase or can be retrospectively switched on or off every time a pro-
gram is selected (see “Settings
/Drying”).
Drying is activated or deactivated prior to program start by pressing
the
button. The LED in the button
indicates whether the addi-
tional function is on or off. The drying time of the program can also be
changed.
When the drying function is activated, the program runs longer.
Activating and de-
activating drying
Select a program.
Press the
button before the program starts.
If the drying time (
Drying time
) is set as changeable (
Time changeable?
)
in the program settings, the time set can be altered. Otherwise, the
drying time set cannot be changed.
If drying is deacti-
vated
If the drying function was deactivated previously, it can be activated
by pressing a button.
Drying
)
Min
(0 - 120
30
Min
If the time is set as changeable, the preset drying time for this pro-
gram is shown in minutes (min) in the display and the possible setting
range is displayed in the bottom line.
Use the arrow buttons
(higher) and
(lower) to change the dry-
ing time and press
OK
to save the setting. Drying is now activated.
