Program settings
103
Spray-arm moni-
toring
The cleaning result depends on the wash water reaching all surfaces
and cavities of the wash load. To do this the wash water is distributed
throughout the wash chamber by the rotation of the machine, basket
and mobile unit spray arms.
It is possible to monitor the rotation speed of the spray arms during a
program.
The rotation speed is determined using special magnetic spray
arms. The sensors of this machine cannot detect the magnetic spray
arms of older basket and mobile unit models and therefore these
cannot be monitored.
If the rotational speed detected is not within a preset range, this is an
indication of blockage due to loading errors or build-up of foam in the
water circulation system.
The rotation speed range depends on the area of application, the pro-
gram and the mobile unit or basket used.
Switching on
spray arm monitor-
ing
Spray arm monitoring is switched on and off for all wash blocks.
...
Rinse arm monitoring
Rinse arm monitoring
Off
On
-
Off
Spray arm monitoring is switched off.
-
Off for basket
Only the machine spray arms are monitored. The sensors for the
basket and mobile unit spray arms are deactivated.
-
On
All spray arms are monitored.
Select an option using the
and
arrow buttons.
Press
OK
to save the setting.
