Miele 4002516366881 Operating Instructions Manual Download Page 97

Page: 97 / 112

Settings



Miele@home

Your dishwasher is equipped with an in-
tegrated WiFi module.

You can connect your dishwasher to
your WiFi network.
This will increase the energy consump-
tion, even when the dishwasher is
turned off.

The Settings and Miele@home settings
menus will be added as additional
menu options.

Make sure that your WiFi network
signal strength is strong enough at
the installation site of your dish-
washer.

There are a number of ways of connect-
ing your dishwasher to your WiFi net-
work:

Setting up Miele@home

You can connect your dishwasher to
your network using WPS or via the app.

Connect using WPS

You can connect your dishwasher to
your WiFi network using WPS (WiFi Pro-
tected Setup).

Your WiFi router must support WPS.



Confirm the message

Press WPS but-

ton

with



Activate the WPS function on your
router within 2 minutes.



Once the connection has been estab-
lished, confirm the message with

If the connection fails, you have proba-
bly not activated WPS on your router
quickly enough. Repeat the steps
above.

Summary of Contents for 4002516366881

















































































































Search results

Summary of Contents for 4002516366881

Reviews:

Related manuals for 4002516366881

Brands by name

Popular brands

Miele 4002516366881, Operating Instructions Manual

Search results

Summary of Contents for 4002516366881

Reviews:

Related manuals for 4002516366881

Brands by name

Popular brands