English
|
6 Cleaning and maintenance
50
|
12019630; 2021-09
|
Quick guide PTD 901
6.6
Changing the chemical product
Crystallisation can occur as a result of mixing different chemical products, which can dam-
age the dosing device.
Therefore, the dosing device and the dosing hoses must be flushed with water before a
new chemical product is used.
Ø
Remove the suction tube from the container and place it in a water-filled container.
Ø
Access the following menu (see the front fold-out page):
1
2
Item Name
1
Rinse aid dosing device
2
Detergent dosing device
Ø
Press button 1 or 2.
ð
The button turns white.
ð
The dosing device is being vented.
Ø
As soon as the button turns dark again,
exit the menu.
Ø
Press button 1 or 2.
ð
The button turns white, and the dosing device is activated.
ð
The dosing hoses and the dosing device are rinsed out with water.
Ø
As soon as the button goes dark, place the suction tube into the new canister.
Ø
Press button 1 or 2 again.
ð
The button turns white, and the dosing device is activated.
ð
The water in the dosing hoses and dosing device is replaced by the new chemical
product.
In addition, the dosage must also be reset.
Ø
To attain good wash results, commission an authorised service technician.