Settings
114
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
Select the
Display
menu option and
confirm with
OK
.
Select the setting you want and con-
firm with
OK
.
Display Total consumption
Select the
Total consumption
menu op-
tion and confirm with
OK
.
You can display the values for
Energy
and
Water
using the
sensor con-
trols.
You can also reset the values for the
total consumption to 0.
Select the
Reset
menu option and
confirm with
OK
.
Select the
Yes
menu option and con-
firm with
OK
.
Confirm the message with
OK
.
The values are now reset to 0.
Display brightness
You can set the display brightness to
one of seven different levels.
