Miele 11 848 190 Page 35 Operating Instructions Manual Download

Page: 35 / 84

Operation

Turning on the dishwasher



Turn on the water supply faucet if it is
turned off.



Open the door.



Make sure the spray arms can rotate
freely.



Press the



button.

The indicator light next to the program
selected will come on.

Selecting a program

Choose your program according to the
type of load and the degree of soiling.

The different programs and their uses
are described under

“Program

overview”



Use the

Program

button to select the

program you want.

The indicator light next to the program
selected will come on.
The program cycle time will appear in
hours and minutes in the display.

You can now select program options
(see “Program options”).

If any program options are selected, the
appropriate indicator lights will also
light up.

Summary of Contents for 11 848 190





















































































Search results

Summary of Contents for 11 848 190

Reviews:

Related manuals for 11 848 190

Brands by name

Popular brands

Miele 11 848 190, Operating Instructions Manual

Search results

Summary of Contents for 11 848 190

Reviews:

Related manuals for 11 848 190

Brands by name

Popular brands