Miele 09 255 930 Page 68 Operating Instructions Manual Download | Manualshive

Page: 68 / 80

background image

Electrical connection U.K.

,

All electrical work must be

carried out by a suitably qualified
and competent person, in
accordance with current local and
national safety regulations (BS 7671
in the UK).

Ensure power is not supplied to the
appliance until after installation work
has been carried out.

The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. Please ensure the connection
data quoted on the data plate match
the household mains supply.

Connection should be made via a
suitable switched socket which is easily
accessible after installation.

For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.

Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).

This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism.

This appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.

Non-rewireable plugs BS 1363

The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).

Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.

WARNING: THIS APPLIANCE
MUST BE EARTHED

Electrical connection

68

«
...
66
67
68
69
70
...
»

Summary of Contents for 09 255 930

















































































Reviews:

No comments

Related manuals for 09 255 930

Brand: bar aid Pages: 16

Brand: FRAM Pages: 58

SteamScrubber 4010010 Series

Brand: Labconco Pages: 108

Brand: ZANKER Pages: 40

Brand: GE Pages: 40

Brand: NewAir Pages: 24

Brand: Philco Pages: 112

Brand: Heinner Pages: 58

Brand: Indesit Pages: 16

Brand: Progress Pages: 48

Brand: Smeg Pages: 29

Brand: AEG Pages: 28

FAVORIT 65020 M0P

Brand: AEG Pages: 64

FAVORIT 56602 ID0P

Brand: AEG Pages: 76

Brand: Beko Pages: 64

Brand: Beko Pages: 68

Brand: Beko Pages: 52

Brand: Candy Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands