Settings menu
92
AutoOpen
At the end of programs with a drying
phase (see “Program overview”), the
door will open automatically a little in
order to help the drying process.
With the
ECO
program (if available) the
door opens during the drying phase.
This function can be deactivated if you
wish.
Select the setting you want and
confirm with
OK
.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Optimize standby
The dishwasher is supplied with the
Optimize standby
function switched on as
standard.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button is pressed or
after the end of a program.
The dishwasher will not switch off in
the event of a fault.
Optimize standby can be switched off if
you prefer. If you do this, the duration
before the dishwasher switches off
automatically increases to approx. 6
hours. Doing this will increase energy
consumption.
Select the setting you want and
confirm with
OK
.
BrilliantLight
The dishwasher is fitted with interior
lighting.
When the door is open, the lighting
switches off automatically after 15
minutes.
You can also switch off the interior
lighting permanently.
Select the setting you want and
confirm with
OK
.
Software version
You can display the electronic software
version of your dishwasher electronics
for technical support purposes.
Confirm the display with
OK
.