manualshive.com logo in svg

Miele professional PG 8132 SCi XXL, Operating Instructions Manual, Page: 56 / 96

Share
Download
Miele professional PG 8132 SCi XXL Operating Instructions Manual Download Page 56

Programme chart

56

Programme

Use

Cleaning agent

The following dosages are based

on Miele cleaning agents.

Please follow manufacturer's

instructions on dosage.

Compartment I

1)

Compartment II

1)

Short

For fresh, non-sticky food residues.

20 - 25 g 

or 1 tab

Medium

For moderately dried-on food residues.

20 - 25 g 

or 1 tab

Intensive

For burnt-on, stubborn, dried-on food deposits

containing starch or protein. 

1)

10 g

20 - 25 g 

or 1 tab

Plastics

Special plastics programme.

20 - 25 g 

or 1 tab

Glasses

Special glassware programme.

20 - 25 g 

or 1 tab

Hygiene

Special hygiene programme for hygienically
demanding crockery.

20 - 25 g 

or 1 tab

Cold pre-
wash

For rinsing heavily soiled items, e.g. for initial removal of
soil or to prevent residues drying on to dishes when a
complete programme does not yet need to be run.

ECO

Energy saving programme for a normally soiled
load.

20 - 25 g 

or 1 tab

*) This programme is the most efficient in terms of energy and water consumption for washing
normally soiled crockery.
(Programme sequence can not be altered)

1)

 see “Operation - Cleaning agent”

Summary of Contents for PG 8132 SCi XXL

































































































Reviews:

No comments