Miele professional PG 8132 SCi XXL, Operating Instructions Manual, Page: 49 / 96

Operation
49
Time display
The estimated duration of the
programme selected appears in hours
and minutes in the display before the
programme begins. During the
programme, the time left until the end of
the programme is displayed.
Each programme stage is indicated by
a symbol:
 Pre-wash / Soak

Main wash

Interim rinse

Final rinse
 Drying
 Finish
The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process of the water
softener and the amount of crockery.
The times shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit calculates the
programme duration required according
to the temperature of the water taken
into the dishwasher and the amount of
crockery.
Energy management
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a
programme.
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
automatically if the time of day display
has been activated (see “Settings menu
- Time of day”).
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.