9.
About every four feet, loosely attach a Short Plastic Tie (M)
at the top to keep the chain-link in place until it is ready to
be fully secured.
15.
16.
17.
Unroll the Chain-link Fence around the frame of the kennel, being sure to keep tension on the wire by pulling the
roll as you unwind it. Occasionally, it may be necessary to untangle the knuckles at the top and bottom of the roll.
Keeping the tension on the roll tight will help prevent this.
NOTE: As noted on page 8, with two
people the fence can be fully unrolled,
stretched out in its entirety, and lifted,
pulled, and stretched around the
perimeter one small section at a time.
This will minimize bunching and tangling
of the fence during application.
Next, stand one end of the Chain-Link Fence (K) up against the left side of the Gate frame. Starting at the top, thread
the Vertical Tension Rod (J) down through the Chain-Link Fence, front/back, front/back, through each diamond, while
making sure to pass through the eye of each Eyebolt on the way down. Thread the rod all the way through the last
diamond at the bottom.
