20 |
Midland CT990 instruction guide
Functions enabled in channel mode only
Adding a channel to scan (SCAN LIST) - Menu Utilities18
It it possible to add a channel to the scan channel list. To enable it, you must
first set the radio to CH mode.
In Standby mode press
Menu Uti 18
; the display will show “
SCAN-LIST
”.
Push
Menu
to enter the function. Press
▼
/
▲
or turn the encoder to activate
and confirm by pushing
Menu
.
To return in standby condition, press
Back
.
Setting the priority channel (SCAN PRIORITY) - Menu
Utilities 19
The priority channel can be set with the optional programming software.
The SCAN PRIORITY feature is related to the scan function; the options
available are two: OFF/ON.
In Standby mode press
Menu Uti 19
; “
SCAN PRIORITY
” will be di-
splayed.
Press
Menu
to enter the function. With the
▼
/
▲
keys or by turning the enco-
der you can select the channel; then confirm with
Menu
. Push
Back
to return
in standby condition.
The radio will alternately scan the channels and the priority channel.
Working modes (CH-Freq + CH-Display) - Menu Utilities 34
CT990 has 4 working modes available:
•
Frequency mode (FREQ)
In channel mode
the following modes can be set:
•
Channel mode (CH).
• Fre channel number (CH FREQ)
• Channel name (NAME)
•
In Standby condition
press
#
to select the desired working mode.
