MIDIPLUS Co, Ltd. http://www.midiplus.com.tw
You can switch between the sound bank by the
Bank Select
button. Press
the button, then the display shows
“GNPC” for 8030 GM sound bank , or
“8030” for 8030 EMU sound bank.
You can set one of the midi channel by holding
Channel
button .Then you
can choose between the midi channel with 1 and Preset -1. This midi
channel are possible: 0,1,2, 3,4,5,6,7,8,9,10,11,12,13,14,15
The display shows a “C” for this midi channel.
You can set one of the reverb types by holding
RevT
. Then you can choose
between the reverb types with
1
and
Preset -1
. This reverb types are
possible: 0= Room1, 1= Room2, 2= Room3
The display shows a “P” for this reverb programs.
To choose the value of the reverb, hold
RevD
in the same combination with
1/-1
.Possible values are between 0 and 127.
The display shows a “E” for this value of the reverb.
To adjust the volume level of the drum patterns or the S-Engine sounds,
please use the
10/-10
buttons.
The display shows a
“L” for the volume level.
6. This is an overview of the 10 function buttons and
what the display is showing:
6.1 Sound-Mode overview:
Please switch with the
Drum/Sound
button in the sound mode, the display
shows a “S”.
1.1
– this button switches the sound program number in one step up
display: “S” for sound and then the program-number, e.g. S.064
2.Bank Select
– this button switches between the sound bank.
display: “GNPC” for 8030 GM sound or „8030“ for 8030 EMU sound
3.RevT
– with this button you can choose a reverb type. In the S-Engine
there are 3 reverb types usable.
display: “P” for the reverb type and then the type number, e.g. P.002
4.Tempo +1
- In sound-mode the Tempo +1 button controls the 1
