5
1. Drill a hole with a diameter of 15 mm through one of the following options of flat horizontal
surface. Be sure there is room in the under-sink compartment below so that you can make the
necessary connections and house the System.
● Corner of the rim of the sink
● Counter-top next to the sink
2. Line up and connect the drinking faucet and its components as shown on the right. Ensure full
tightening.
3. Ensure that the faucet base lies flat against the surface at the selected location.
4. Push the outlet tubing into the quick connector. Refer to Connecting the Tubing for details.
Mounting the System
1. Fix the bracket to the manifold of the System.
2. Mount the System vertically onto a vertical surface in the under-sink compartment.
3. Hang the unit on the hanger washers. Ensure a minimum height allowance of 40 mm below the
cartridge to enable easy cartridge replacement in future.
Connecting To Water Supply
Connect the drinking faucet to the System using the outlet tubing, and connect the System to the
water supply using the inlet tubing. For ease of service and maintenance, keep sufficient length of
tubing for easy movement of the System in the under-sink compartment.
Installing Drinking Faucet
Drinking faucet
Outlet tubing
Inlet tubing
System
