Midea HS-202WEN, Service Manual

Page: 20 / 38

Service Manual_2018-V2.0
20
All accessories in the refrigerating chamber should be
removed before dismantling the air duct mask.
1
）
Remove the 6 screws fixing the air duct mask.
2
）
Disconnect the wiring connector and dismantle the air
duct mask.
Fan motor of air duct
The air duct mask should be removed before dismantling
the fan motor.
1
）
Remove the aluminized tape around the fan;
2
）
Separate the 4 rubber pop-rivet fixing the fan and
take it down.
8.5 Evaporator and temperature sensing system
Evaporator in refrigerating chamber
1
）
Move the air duct mask in refrigeration chamber.
2
）
Sconnect all connectors.
3
）
Move the welding on inlet and outlet tubes.
4
）
Move the evaporator.
Components on the evaporator None