Midea HC-957WEN, Service Manual, Page: 31 / 59

Service Manual_2018-V2.0
31
Components on the evaporator
Defrosting fuse None
Defrost sensor None
Defrost heater None
8.7 Compressor case
Rear cover
1
）
Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2
）
Take the back cover plate of compressor chamber
upward.
Compressor and the cooling system pipe
1
）
Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.
2
）
Slowly tilt the refrigerator forward, relying on the wall or
a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3
）
Cut off the compressor pipeline.-
❶
Cut off the process
pipeline.-
❷
Cut off the low-pressure muffler.-
❸
Cut off
the high-pressure exhaust pipe.