![background image](http://html1.mh-extra.com/html/midea/22033010000701/22033010000701_service-manual_1791279025.webp)
ServiceManual_2018-V1.0
25
Before remove the sensor, the refrigerating duct
assembly should be removed
1
)
Remove the air duct
assembly from the refrigerating.
2
)
Remove the sponge tape on the surface and remove
the sensor.
The sensor position is on the back of the duct cover.
Ambient temperature sensor
None
Sensor in Variable temperature chamber
None
Thermostat
Thermostat
None
8.6 Compressor case
Rear cover and compressor case
1
)
Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2
)
Take the back cover plate of compressor chamber .
Terminal box of the compressor
Remove the screws
Two screws outsideOne screw inside
None
Compressor and the cooling system pipe
Summary of Contents for 22033010000701
