![background image](http://html1.mh-extra.com/html/midea/22033010000701/22033010000701_service-manual_1791279013.webp)
ServiceManual_2018-V1.0
13
2
)
Rotate the door assembly 180 degrees, exchange the
position of the upper sleeve and the shaft
plug , and move the door stopper and the lower sleeve
from the lower right to the lower left.
3
)
Assemble the sleeves, the shaft hole cap, the stopper
and the switch block. Install the door on the cabinet.
3.6 Installation of handle
Installation of handle
1
)
Put the handle on glass door through the bolts.
Summary of Contents for 22033010000701
