Midea 22031010001341, Service Manual

Page: 22 / 42

Service Manual , 2016-12
22 / 42
1
）
2
）
Before dismantle it ,please make the front evaporator
cover(bottom) be removed already
1)
Loosen the plastic clips,move the rear cover outwards
2)
Hold the edge of cover, and dismantle it from the
refrigerator
3)
Dismantle the screw, move the fan motor from the
refrigerator
Replace the fan motor, the inverse operation to complete
installation
Damper assembly
(None)
8.5
Evaporator and temperature sensing system
Evaporator in freezing chamber
1
） Remove the air duct components in freezing
chamber.
2
）
Disconnect all connectors.
3
）
Remove the welding on inlet and outlet tubes.
4
） Remove two screws which are used to fix the
evaporator and remove the evaporator.
Components on the evaporator
❶ Fuse
The fuse is located on top of the evaporator
1
）
connect the fuse connector.
2
）
Cut off the band which fixes the fuse.
3
） Separate the fuse and the evaporator.
*,Dont break the welding of the evaporator in case that
only the fuse needs to be replaced.