Midea 22031010000841, Service Manual

Page: 22 / 47

Service Manual , 2016-12
22 / 47
There is a light switch on the top of the re frigerating
chamber.Loosen the hook with small normal
screwdriver and pull out the switch until the wire
connector reveals.
8.4 Air duct and fan motor
Front evaporator cover of freezer(bottom)
All accessories in the freezing chamber should be
dismantled before removing the air duct components.
1) use cross screwdriver to remove the 2 pcs screws of
air duct cover
2) hold the upper position of air duct cover, and pull it
our slightly, it should be very careful for avoiding
the wiring harness/connector be damaged if
overexert
3) unplug all wiring connectors ,and dismantle the air
duct cover from the rear side of refrigerator inner
4) hold the upper cover from the bottom, pull out the
upper cover
Front evaporator cover of freezer (upper)
After dismantle the bottom evaporator cover, please
hold the bottom side of upper evaporator cover ,and use
both hands to pull outwards from bottom to top to
dismantle it.
The reverse operation is for installation
Rear cover of Freezer