Midas PRO6, Owner'S Manual

Page: 123 / 614

Scene and show management (automation)
97
PRO6 Live Audio System
Owner’s Manual
Show editor
The show editor is a GUI-only function
that allows you to very easily copy and
paste settings through scenes. This is
done via the Show Editor screen
(shown right).
The panel on the far left of the Show
Editor screen shows the sources
(channels, GEQs and effects) from
which you can copy the settings. The
Sections panel in the centre of the
screen contains source sections that
you can copy to the scene(s). At the far
right of the screen is the Scenelist
panel, which is a cue list of the current
show. For details of the parameters per
area, see Appendix P "Parameters Copied Through Scenes" on page 543.
>> To open the Show Editor screen
Do one of the following:
• From the GUI menu, choose home Automation Show Editor.
• At the Automation screen, click SHOW EDITOR.
>> To copy and paste sections to a scene(s)
1
In the Show Editor screen, click the sources that contain the sections you want
to copy to a scene(s). These are in the far left panel of the screen. You can
choose any combination of inputs, aux returns, aux sends, matrices, GEQs,
effects and masters.
2
In the Sections panel, click the boxes of the sections that you want to copy.
Ticked options will be copied.
3
In the Scenelist panel, click the scene(s) in which you want to paste the
sections. You can use the buttons at the bottom of the list to help you, as
follows:
• Click ALL to select all of the scenes in the list.
• Click NONE to deselect all selected scenes.
4
Click PASTE TO SCENES.