Midas PRO6, Owner'S Manual

Page: 117 / 614

Simple routing to master stereo outputs
91
PRO6 Live Audio System
Owner’s Manual
6
Change the parameters of the new effect
device as necessary. For example, adjust
control knobs, press buttons etc. You can
even change the effect’s name by editing its
name field (upper-left corner of effect
window).
7
Click OK to exit. The new effect will appear
in the effects rack.
You can now patch the new effect, which will be on
the Effects tabs of both the From and To sections
of the Patching screen. For information on how to
patch, see Chapter 8 "Patching" on page 55.
Simple routing to master stereo outputs
The following shows you how to obtain audio. Before proceeding with this operation,
make sure nothing is muted and master faders are up.
>> To obtain audio
Do one of the following:
• Press the ST (stereo) button of
an input fast strip.
• Press the ST (stereo) button of
a channel strip.