INSTRUCTION SHEET
Part Number
Application:
Tools Needed
2900 North Third Street, Effingham, IL 62401
800.500.1500 • Worldwide: 217.540.4200 • FAX: 217.540.4800
w w w.mamotor works.com • generalmail@mamotor works.com
©Mid America Motorworks, Inc. All rights reserved.
118-170
12 Volt Battery Charger
12 Volt Systems
SAVE THESE INSTRUCTIONS:
PLEASE READ ALL THE CAUTIONS FROM THE BATTERY
YOU ARE WANTING TO CHARGE BEFORE BEGINNING!
NOTE 1:
Always provide good ventilation when charging.
NOTE 2:
When charging, batteries can emit explosive gases, therefore it
is essential to prevent open flames and all sparks. This charger is
designed for charging lead-acid batteries from 2 to 90 Ah. Do not
use for any other purpose.
NOTE 3:
Use of any other attachment is not recommended and may result
in a risk of fire, electrical shock or serious injury.
NOTE 4:
To reduce risk of damage to the electrical plug and cord, when disconnecting pull by the plug rather than by the cord.
NOTE 5:
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a
risk of fire or electrical shock. If an extension cord must be used, make sure that: a) Pins on plug of extension cord are
the same number, size and shape as those of the plug on the charger; b) The extension cord is properly wired and in
good electical condition; c) Wire size is large enough for AC ampere rating as specified in “technical data”.
NOTE 6:
Never operate the charger with a damaged cord or plug if it has received a sharp blow, been dropped or damaged in
any way; take the charger to a qualified serviceman.
NOTE 7:
Do not disassemble the charger, take it to a qualified serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electrical shock or fire.
Part Includes
1 - 12V Battery Charger
