5-8
STRATA TX Operation Guide
400
Rev.
MPEG Menu
STRATA Tx Configurator
5.9
MPEG Menu
The MPEG Menu sets options for the MPEG Encoding when the MPEG and
COFDM module is used in either the TXU or TCU. Note that only those Presets
with the MPEG and COFDM setting can be modified in this menu.
Table 5-3
MPEG Menu Option
Option
Description
Service Name
Identifies a unit or integrated stack by function, location,
or type.
Network Name
Station name, network affiliate, or application
Video Input
NTSC – 525 line format
PAL – 625 line format
Chroma Format
4:2:0 (420 profile @ main level)
4:2:2 (422 profile @ main level)
Delay Mode
Standard or Low Delay Mode
ASI Bit Rate
Displayed only when using “MPEG Only - ASI Out” as a
preset option.
Wayside Channel
Baud Rate
1200, 2400, 4800, 9600, 19200, 38400
Audio Type
MPEG or Linear Audio.
Audio A Mode
Dual Mono or Stereo
Audio A Input
Test Tone, Analog, SDI Embedded, or AES/EBU
Audio B Mode
(Same as Audio A)
Audio B Input
BISS Encryption
BISS, BISS-1, or BISS-E Encryption Modes
• BISS-1 requires Key
• BISS-E requires Key and ID
Note: BISS-1 or BISS-E Encryption must be licensed
through MRC. Encryption keys and ID codes are set at
the factory and cannot be altered in the field.
5.9.1
Audio Settings
Audio channels are grouped as follows:
• Audio A sets options for channels 1 and 2
• Audio B sets options for channels 3 and 4
Using the MPEG module let you use both analog and digital audio channels.
For more information, see
Audio & Video Connections, Section 6 on page 6-1
Figure 5-12 MPEG Menu
Dual Mono
MPEG
Stereo
Preset
SDI 525 In
NTSC In
NTSC No_Pedestal
4:2:0
4:2:2
Standard
Low
1200
2400
4800
9600
19200
38400
Linear
Off
Test Tone
Analog
SDI EMB
AES EBU
See BISS Encryption
Off
BISS-1
BISS-E
Service Name
Network Name
ASI Bit Rate
(TCU only)
