2-6
STRATA TX Operation Guide
400
Rev.
Universal Mounting Bracket
Installation
2.3.2
Installing and Removing a Unit from the Bracket
You can remove a unit from it s individual bracket without removing it from the
stack.
Note:
For ease of removal, be sure to level the unit stack.
Follow these steps:
Step 1
Pull the latch and latch release toward the front of the unit as
shown in
Figure 2-8
.
Figure 2-8 Latch and Latch Release
LATCH
LATCH
RELEASE
PULL IN
THIS DIRECTION
Step 2
Once the latch releases, make sure it is clear of the unit as
shown in
Figure 2-9
. Repeat this for the latch on each side of
the unit.
Figure 2-9 Moving Latch Clear of Unit
Step 3
Next remove the unit from the bracket as shown
Figure 2-10
.
Figure 2-10 Unit Removed from Universal Bracket
