2-5
STRATA TX Operation Guide
400
Rev.
Universal Mounting Bracket
Installation
2.3.1
Adding and Removing Units from the Stack
Follow these steps to remove units from a stack.
Step 1
Loosen the captive screws on both sides of the unit as shown in
Figure 2-6
.
Figure 2-6 Captive Screws on Universal Bracket
Step 2
Once the captive screws are loosened, lift the unit from the
stack as shown in
Figure 2-7
.
Figure 2-7 Removing Unit from Stack with Universal Bracket
Step 3
To install the bracket, reverse these steps.
