User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-80
MDS FIVE Series
05-4574A01, Rev. C
9. Errors
10. Errors/sec
11. Collisions
12. Collisions/sec
for Port 1, Port 2, CPU, Radio Link (East) and Radio Link (West) of the NMS
Switch, as shown in Figure 3-52.
3.3.43 WEB Configuration
1. Navigate to Analysis -> Statistics and click on the “NMS Switch” link in the
left panel.
2. Press the “Clear” button to clear the data and start accumulating again.
3.3.44 CLI Configuration
Navigate to Analysis -> SNMP Switch Statistics.
3.3.45 SNMP Configuration
1. Select a parameter from the MIB section ccmSDIDUAnalysisNMSSwitch
2. Use the SNMP GET command to get the value of the required parameter
3. The SNMP agent will return the actual value on successful get operation.
Upon failure, the SNMP agent will return an error if agent is not able to get
the value or the user does not have access rights to the selected
parameter.
