User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-26
MDS FIVE Series
05-4574A01, Rev. C
second. These parameters can be used to give a personalized appearance to the
CLI.
Figure 3-16. CLI Starting Information Screen
3.3.11.2 WEB Configuration
1. Navigate to Administration
Æ
Device Configuration and click on the “Device
Names” link in the left panel.
2. The current values of the parameters are displayed here.
3. Select and modify desired parameters.
4. Click the “Update” to button submit these changes.
5. Click the “Reset” button to undo changes
3.3.11.3 CLI Configuration
1. Navigate to Administration
Æ
Device Configuration
Æ
Device Names
2. Device related parameters are displayed with current/present values.
3. To edit an individual parameter, enter its hotkey, edit its value and press
the Enter key.
4. To revert to the previous value, press the “Esc” key while editing the value.
5. To update the edited parameter, press the hotkey for “Update”.
6. The page is refreshed and displayed with the updated or current/present
values.
7. If parameters are not updated with entered values, the value entered may
be invalid for that parameter.
