Microwave Data Systems MDS entraNET 900, System Manual

Page: 59 / 148

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide (Preliminary) 51
The Wireless
Network
Status Screen
Figure 2-28. Wireless Network Status Screen
•
Connection Status
—Current state of the wireless net-
work communication.
• Scanning—The unit is looking for an Access Point beacon
signal.
• Exp(ecting) Sync(hronization)—The unit has found a valid
beacon signal for its network.
• Hop Sync—The unit has changed its frequency hopping pat-
tern to match that of the Access Point.
• Associated —This unit has successfully synchronized and
associated with an Access Point. This is the normal status.
• Alarmed—The unit is has detected one or more alarms that
have not been cleared.
•
Current AP
—Wireless address of Access Point with which
the Remote is associated.
•
Association Date
—Date of last successful association
with an Access Point.
•
Association Time
—Time of day association was estab-
lished on the association date.
Library Admin Office
Wireless Network Status
-==========================================================================-
Connection Status Associated
Current AP 00:06:3d:00:00:f2
Association Date 03 Aug 2002
Association Time 19:38
Select a letter to configure an item, <ESC> for the prev menu