Microtronics myDatalogNANO Ex, User Manual, Page: 13 / 111

Chapter 3 Technical data
Chapter 3 Technical data
Voltage supply BP713RLC Batterie : 2 x Li-SOCl2 cells fully fabricated with 13Ah
l
U
m
: 7,8V
Housing Material: UL94HB/UL94V0 (housing/lid)
Weight: 510g (incl. battery)
Degree of protection: IP68
Dimensions (WHD): 86 x 152 x 64mm (without connection cable)
Ex certification
II 3G Ex ic IIA T4 Gc
Operating
temperature Standard: -10...+50°C, 15...90%rH non-condensing
Extended: -20...+60°C (functional parameters may be impaired)
Storage
temperature -30...+85°C
Display LED for indicating the operating state and error codes
Operation Solenoid switch for initiating ALOHA transmission mode
Antenna
connector TNC-F
Universal inputs 2 x digital
l
U
o
: 7,8V
l
I
o
: 35,8mA
l
P
o
: 69,8mW
l
C
o
: 21µF
1)
l
L
o
: 1000µH
1)
Modes:
l
PWM: 1...99% , max. 25Hz , min. pulse length 20ms
l
Frequency: 1...25Hz
l
Digital: low <2,3V, high >2,4V
l
Day counter: Minimum pulse length 20ms
l
Interval counter: Minimum pulse length 20ms
Additional information is provided in "Technical details about the universal
inputs" on page 49.
Data memory Internal flash memory for up to 26.360 measurement cycles
Data type f32(32 Bit floating point)
Data transmission By means of GSM/GPRS quad-band modem to the respective myDatanet server
SIM
The myDatalogNANO Ex is equipped with an integrated SIM chip.
Country list profile of the SIM chip: 1 (see www.microtronics.at/footprint)
Monthly data
volume t.b.d. at two-minute measurement cycle and 120-minute transmission cycle
Rev. 01 13