Chapter 10 XML interface
Context
Unique data record number of the site (read only)
ch1 - ch4
Measurement values of the universal inputs
calc60 - calc64
Measurement values of the "Calculated channels"
Important note: However, these measurement values are not saved in the database but
are recalculated during each access (display or download) based on the specifications
entered via the "Calculated channels" configuration section (see "Calculated channels"
on page 64).
volt
Voltage [V]
gsm_
GSM level [dBm]
temp
Internal device temperature
10.2.2.2 mydatalog4log
This table contains the log entries and error codes (see "Log entries and error codes " on page 130)
of the device.
log
Log entry
par
Parameter for the log entry
10.2.2.3 mydatalog4_usrcfg
This table contains the device-specific configurations (configuration of the universal inputs, basic
settings and alarm settings) that are transferred to the myDatalog4 .
These device-specific configurations are supplemented with the configuration from the "geraetid"
table (see "geraetid" on page 81) that is the same for all of the myDatanet devices.
context
Unique data record number of the site (read only)
record_interval
Time between measurement data recordings
transfer_interval
Time between transmissions
Rev. 01
85