Microtronics BLE mA Link, User Manual, Page: 31 / 46

Chapter 9 User interfaces
Chapter 9 User interfaces
The BLE mA Link does not have any user interfaces. Compatible data loggers can, however, display status
information about the BLE mA Link on the display or via the input screen for configuring the site. The data
logger is configured via the web interface on the myDatanet server; the web address is provided by your
responsible sales partner. The link between the data logger and the BLE mA Link is established via the
"Output channels" section in the input screen for configuring the site (see "Output channels" on page 32).
9.1 Display of a compatible data logger
Important note:
l
Do not touch the display with a sharp object, such as the tip of a pen.
l
Do not stand or place any objects on the display as this could scratch it.
Note: A detailed explanation of the display functions is available in the manual of the relevant data
logger.
Status indication during normal operation
1 Type designation of the BLE module 4 Each point/circle represents a coupled BLE
module. The point represents the BLE module for
which the value is currently shown on the display.
2 Serial number of the BLE module 5 Remaining days until the battery of the BLE
module currently shown on the display needs to
be replaced.
3 Current value (incl. unit)
9.2 Site configuration of a compatible data logger
Note: A detailed explanation of the site configuration is available in the manual of the relevant data
logger.
Click on the name of the site in the list of sites to open the input screen for configuring the site (see
"myDatanet Server Manual " 805002).
Rev. 01 31