Microtronics 300871, User Manual, Page: 25 / 70

Chapter 7 Installation
Chapter 7 Installation
Important note: To prevent any damage to the device, the work described in this section of the
instructions must only be performed by qualified personnel.
7.1 Dimensions
Dimensions BLE Gauge and pressure sensor: Length and diameter
7.2 Installing the BLE Gauge
Important note:
l
Ensure installation is completed correctly.
l
Comply with existing legal and/or operational directives.
l
Improper handling can cause injuries and/or damage to the devices.
l
The pressure compensation must be protected against contamination.
The installation site must be selected according to specific criteria. The following conditions must be avoided
in any case:
l
Direct sunlight
l
Direct weather exposure (rain, snow, etc.)
l
Objects that radiate intense heat (maximum ambient temperature: -20...+50°C )
l
Objects with a strong electromagnetic field (frequency converter or similar)
l
Corrosive chemicals or gases
l
Mechanical impacts
l
Direct installation on paths or roads
l
Vibrations
l
Radioactive emissions
Rev. 02 25