34
Mounting options
VESA Mount
The monitors have an integral VESA standard mount pattern that conforms to the “VESA Flat
Display Mounting Interface Standard” which defines a physical mounting interface and corresponds
to the standards for monitor mounting devices. The -490 and -550 have a 300 mm pattern, while the
-650 has a 400 mm pattern, as illustrated on the following pages.
Follow the manufacturer’s manual instructions for the type of mount you have selected.
Refer all servicing to qualified service personnel.
Moving the display requires at least two people. To avoid damaging the front panel during
the move, be sure to use the handles in the back of the display while lifting or moving
the display.
Before installing, please make sure the wall or other mounting surface is strong enough
to hold the weight of the display and the mount.
Step 1. Select a sturdy, flat work surface of suitable size and strength to support the
monitor.
Step 2: Put a suitable pad material on the work surface to protect the display.
Step 3: Place the display front side down on the padded work surface.
Step 4: Remove the screws (M8*20) from the back of the display.
Step 5: Align the mounting brackets with the display’s mounting holes and attach
the brackets to the display using the screws
(M8*20mm, 4pcs)
removed in Step 2.
!
Warning
Please use the correct screws! The distance between the back cover surface and the bottom of the
screw hole is 20 mm. Please use four M8 diameter screws with 20 mm length to mount the monitor.
!
Mise en garde
Veuillez utilizer les vis correcte! La distance entre la surface du capot arrière et le fond du trou de vis
est de 20 mm. Veuillez utilizer quatre vis de diamètre M8 d’une longueur de 20 mm pour mounter le
moniteur.
