MicroTouch M1-490DS-A1, User Manual

Page: 33 / 47

33
Network Configuration details
(Selected from Advanced Settings OSD menu)
Sub-Sub
Menu Sub-Sub-Sub
Menu
Description Setting Default
Network
Configuration
UART Baudrate
Adjusts the baud rate of
serial port (RS-232)
115200 / 38400
/ 19200 / 9600
115200
Network Enable network feature No / Yes No
Dynamic IP Enable Dynamic IP mode On / Off Off
Static Set Static IP address 255.255.255.255(0.0.0.0) 0.0.0.0
Netmask Set subnet mask 255.255.255.255(0.0.0.0) 0.0.0.0
Gateway Set gateway address 255.255.255.255(0.0.0.0) 0.0.0.0
DNS Set DNS address 255.255.255.255(0.0.0.0) 0.0.0.0
Save Settings
Update the IP settings
To net device
No / Yes --
Refresh Refresh Dynamic IP info --
Power Status
Alert
Power change notification
sent letters
On / Off Off
Source Status
Alert
Source change notification
sent letters
On / Off Off
Lost Status Alert
Signal lost change
notification
sent letters
On / Off Off
Load Default
Load default network
settings
No / Yes --
MAC Address MAC Info 00:00:00:00:00:00 00:00:00:00:00:00