18
Using the OSD Menus
Navigating through the Menu System
With the power on, press
MENU
and the
on-screen menu
will pop up.
Within the menu, use
,
to navigate through the six menus (Image Settings, Display Settings, Audio
Settings, Basic Settings, Advanced Settings, and second Advanced Settings). Use
SELECT
to open
the highlighted menu. Then use to
,
to highlight or
adjust options and
SELECT
to return to the
previous menu.
Press
MENU
to return to exit the OSD menu
Note that some of the adjustments may be grayed out, indicating that they are not selectable. This
indicates the use of a digital video input signal (DP or HDMI). These selections are fixed/not adjustable
for digital video signals. The VGA video signal (because it is analog) may require all adjustments, so
they are all selectable when VGA is being used.
The OSD menu will automatically close if left idle for a pre-set time.
Locking the OSD and Power button functions
Lock OSD
:
prevents all the monitor settings from being changed. When this function is activated, all
OSD controls and hotkey operations will be disabled except for the Power and RS232 buttons.
•
Hot Key:
Remote key and keypad Lock/Unlock Control.
•
Lock:
Press Enter, Enter, Exit, Exit, Enter and Exit on the controller by sequence and all keys
(including remote and keypad) will be locked except RS232 and power on control.
•
Unlock:
Press Enter, Enter, Exit, Exit, Enter and Exit on the controller by sequence again and
all keys will be unlocked.
