13
Product Setup and Use
Input and Output Connectors
Power Connector
Power Input: 4-pin 12VDC power connector
12V DC in
Pin #
Signal Name
Pin #
Signal Name
1
12VDC
2
12VDC
3
GND
4
GND
NOTE: USE THE CORRECT POWER SUPPLY.
MicroTouch touch computer models IC-156P/215P-AW2, AW3 and AW4 have similar power
connectors, but they are 24 VDC. If you have a mix of different models, check the voltage rating on
the power converter to ensure it is the correct voltage for the touch computer model.
Auxiliary Power Output Connector
DC Output: 12VDC general purpose power output. Center pin: +12VDC
’; barrel: ground.
Communications Ports
USB 2.0 Four type-A USB communications ports
RS-232: Two RJ-50 serial RS-232 communications ports
Network Connection
LAN : RJ-45 Ethernet network connector (Supports 10/100/1000Mbps)
Summary of Contents for IC-215P-AW1-W10
