56
FPD Touch Monitors Installation Guide
Maintaining Your Touch Monitor
To maintain your display and keep your monitor operating at peak
performance:
•
Keep your monitor and screen clean. Refer to “Touchscreen Care
and Cleaning” later in this chapter for more information on
cleaning the touchscreen.
•
Adjust the monitor video controls. Refer to Chapter 3 for more
information.
•
Keep all ventilation slots and openings clean. Vacuum the opening
if you notice dirt accumulating on them.
•
Do not block ventilation slots and openings with objects or install
the display in a place where ventilation may be hindered. Always
maintain adequate ventilation to protect the display from
overheating and to ensure reliable and continued operation.
Touchscreen Care and Cleaning
The touchscreen requires very little maintenance.
MicroTouch recommends that you periodically clean the glass
touchscreen surface.
•
Use isopropyl alcohol or a non-abrasive glass cleaner. Avoid using
cleaners other than glass cleaners. Do not use any vinegar-based
solutions.
•
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty
cloths.
•
Always dampen the cloth and then clean the screen. Be sure to
spray the cleaning liquid onto the cloth, not the screen, so that the
drippings do not seep inside the display or stain the bezel.
•
Always handle the touchscreen with care. Do not pull on or stress
cables.
