52
FPD Touch Monitors Installation Guide
Clearance and Ventilation
•
Leave at least two inches of space behind the ChassisTouch
monitor for proper ventilation.
•
Keep all ventilation slots and openings clean. Vacuum the opening
if you notice dirt accumulating on them.
•
Do not block ventilation slots and openings with objects or install
the display in a place where ventilation may be hindered. Always
maintain adequate ventilation to protect the display from
overheating and to ensure reliable and continued operation.
Securing and Routing System Cables
You must be sure to secure all cable connections. Shaking and
vibration, especially during shipment, may dislodge components that
are improperly connected.
•
Be sure to tighten all cable screws.
•
Use the cable tie and cable mount supplied in the ChassisTouch
hardware kit to secure the power supply cable.
•
Route all wiring and cabling away from heat sources and sharp
metal edges to avoid damage. Also, keep the touchscreen cable
away from sources of electromagnetic and radio frequency
interference.
Use the cable tie and
mount to secure the
power cable
