32
FPD Touch Monitors Installation Guide
If the AutoStart feature is not active:
1.
Insert the TouchWare CD into the CD-ROM drive.
2.
Click on Start
Æ Settings Æ Control Panel.
3.
Double-click on Add/Remove Programs.
4.
Click on Install to run the \Setup program on the CD.
5.
Follow the on-screen instructions to complete the installation.
After the software is installed, restart your computer to load and
activate the touchscreen driver. To complete the setup of your
touch monitor, make sure you calibrate the touchscreen.
Installing TouchWare for Windows 3.1
x and MS-DOS
1.
Insert the TouchWare CD into the CD-ROM drive.
2.
Open the Program Manager.
3.
Open the File menu and choose Run.
4.
Enter D:\CDROM\SETUP
where D is the letter of your CD-ROM drive.
5.
Follow the on-screen instructions to complete the installation.
After the software is installed, restart your computer to load and
activate the touchscreen driver. To complete the setup of your
touch monitor, make sure you calibrate the touchscreen.
