Microtec ROBWAY 1502 Installation Instructions Download Page 1

Page: 1 / 4

C:\Work\Microtec\Website\website\Documentation- External\External Warning Lights-Instructions\Robway 1502\Robway

1502.doc

1/4

MICROTEC ENGINEERING

EXTERNAL WARNING LIGHT

INSTALLATION INSTRUCTIONS

ROBWAY 1502

ESTIMATED TIME OF INSTALLATION: 3 HOURS

DISCLAMER: Emton Pty Ltd, Trading as Microtec Engineering, do not take any responsibility for
any damage caused installing this product

Summary of Contents for ROBWAY 1502

Page 1: ...ns Robway 1502 Robway 1502 doc 1 4 MICROTEC ENGINEERING EXTERNAL WARNING LIGHT INSTALLATION INSTRUCTIONS ROBWAY 1502 ESTIMATED TIME OF INSTALLATION 3 HOURS DISCLAMER Emton Pty Ltd Trading as Microtec...

Page 2: ...rovided the unit has a cut off system fitted Some machines even with cut off may not allow safe functions without O R 3 Then turn the over ride switch and confirm all unsafe functions are operational...

Page 3: ...LE Yellow Red Blue White Black Yellow Red Blue White Black Use ferrule crimps provided to make the connections to the activation box You may also need to shorten the length of the ferrules so the lid...

Page 4: ...m below Confirm that the other side of this termination goes to a relay shown in the diagram If not then connect the resistor as shown in the diagram on p 3 NOTES Connect the yellow wire from the loom...