migan/migra MPB IZ
Large Format LED Display with Pulse Counter
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0,
+49 9681 91960-10, [email protected], www.microsyst.de
Page 5
3 Technical Data
Display type:
7 segment LED (migan), LED dot matrix (migra)
Digits:
1 to 100
Decimal point:
configurable position
View:
single or double sided
Inputs:
2 pulse inputs,
Second pulse input can be configured as input with
counting direction,
inputs for phase-delayed signals pulses (input for
incremental encoder (TTL))
Reset/preset input,
4 inputs (migan controller),
Optional preset inputs BCD
Outputs:
4 outputs (migan controller)
Cut-off frequencies:
can be configured with MKS software
10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, >1 MHz
–
max. 2 MHz
Input level:
adjustable with MKS software
(pulse input)
5 V, 10 V, 12 V, 15 V, 24 V, 36 V, Pull-up to 5 V
Input level:
adjustable with MKS software
(Reset/preset)
5 V, 10 V, 12 V, 15 V, 24 V, 36 V, Pull-up to 5 V
Input level:
U
low
0 VDC
(incremental input)
U
high
5 VDC
Display options:
counting value,
frequency (counting pulses per time unit),
number of revolutions,
cycle duration,
speed (incremental input),
customer-specific
Dimensional display:
upon request
Operation voltage:
230 V / 50 Hz, 110 V / 60 Hz or 24 VDC +/-20 %
Housing:
industrial version, powder coated aluminium
Mounting:
articulated arm, hanging with chain, angle brackets
Protection:
IP54 or IP65
Operating temperature:
0 to +50
C (optional -20 to +50 °C)
Storage temperature:
-25 to +70
C