098-00720-000 Revision B – April, 2016
SyncServer 600 Series User’s Guide
147
Chapter 6 Provisioning
Provisioning Input References
Table 6-8. Configure Sine Wave Inputs on Timing I/O Module
Method
Steps
Notes
Web Interface
Option Slot A > Timing I/O Card
1. For input J2, use dropdown box to
select “Sine” or Off.
2. If sine is selected, use the
dropdown box to select the
frequency of the sine wave input:
- 10 MHz
- 5 MHz
- 1 MHz
3. Click the
Apply
button.
CLI
n/a
n/a
Front Panel
n/a
n/a
