Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
18
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
3.3.4 SNMP Configuration
SNMP configuration applies to configuration parameters common both to SNMPv2 and SNMPv3 (as SNMP
trap list), SNMPv2 only, SNMPv3, and partial RFC3621 PoE MIB.
Figure 3-10: SNMP Configuration
Enable SNMPv2
Enable/Disable SNMPv2 support.
SNMPv2 GET Community
SNMPv2 GET community string. For example
– public.
SNMPv2 SET Community
SNMPv2 SET community string. For example
– private.
SNMPv2 TRAP Community
SNMPv2 Trap community string. For example
– public.
MIB-II SysContact
SNMP MIB-II system contact OiD string. For example
– John.
MIB-II SysName
SNMP MIB-II system name. For example
– My Unit.
MIB-II SysLocation
SNMP MIB-II system location. For example
– University.
Trap Manager #1
First IPv4 / IPv6 / DNS name of remote SNMP Manager Server receiving unit trap
reports such as Cold-Start, etc.
Trap Manager #2
Second IPv4 / IPv6 / DNS name of remote SNMP Manager Server receiving unit
trap reports such as Cold-Start, etc.
Enable SNMPv3
Enable/Disable SNMPv3 support.
SNMPv3 User Name
SNMPv3 user name string.
SNMPv3 Authentication
Password
SNMPv3 password to be used by MD5 / SHA.
SNMPv3 Privacy Password
SNMPv3 password to be used by DES.
