Read Rate
MS-810 Industrial Scanner User’s Manual
4-3
4–Ut
ili
ties
Read Rate
Decode (and percentage) rates can vary dramatically due to the angle and location of
the label in relation to the scan beam (or scan line, if using a scan head with a moving
beam). These tests are very useful in aligning and positioning the scanning device dur-
ing installation.
Single Label Percent Test
Clicking
Single Label Percent
and
Start
instructs the scanner to output the percent of
decodes and any scanned label data.
Associated serial command:
<Cp>
Single Label Decodes/Second Test
Clicking
Single Label Decodes/Sec
and
Start
instructs the scanner to output the
decodes per second and label data (if any). The decode rate can vary dramatically due
to the angle and location of the label in relation to the scan beam (or scan line, if using
a scan head with a moving beam). This test is very useful in aligning and positioning
the scanning device during installation.
Associated serial command:
<C>
Multi-label Percent Test
Clicking
Multi-label Percent
and
Start
instructs the scanner to output the percentage
of scans decoded and label data (if any) for multiple labels.
Associated serial command:
<Cm>
Multi-label Decode Rate Test
Clicking
Multi-label Decode/Sec
and
Start
instructs the scanner to output the
decode rate and label data (if any) for multiple labels.
Associated serial command:
<Cs>
Summary of Contents for MS-810
