Microscan MS-810, User Manual

Page: 79 / 144

Output Commands
MS-810 Industrial Scanner User’s Manual
3-17
3–Ser
ial
Conf
ig.
Noread Message
Format: < Kk status,output>
Example: To enable Noread Message and send the message “FAIL,” send
<Kk1,FAIL> .
Beeper
Format: < Ku beeper status,beeper volume>
Example: To set the beeper for On Noread and set the beeper volume to Off, send
<Ku1,0> .
Laser On/Off
Format: < KC status>
Example: To enable Laser On/Off, send <KC1> .
Partial Output
Format: < KY status,start position,length>
Example: To enable Partial Output, set start position to 5, and set length to 6 charac-
ters, send
<KY1,5,6> .
status:
0 = Disabled
1 = Enabled
noread output:
Default is NOREAD.
Any ASCII string up to 7 digits.
beeper status:
0 = On Good
1 = On Noread
beeper volume:
0 = Off 3 = Level 3
1 = Level 1 4 = Level 4
2 = Level 2 5 = Level 5
status:
0 = Disabled 1 = Enabled
partial output status: start position: length:
0 = Disabled
1 = Enabled Default is 1
1 to 63 Default is 63
1 to 63