Microscan MS-710, User Manual, Page: 95 / 186

Chapter 6 I/0 Parameters
MS-710 Scanner User’s Manual
6-7
6–I
/0 Param
e
te
rs
Noread Message
Noread Status
Noread Message
Note: Noread Message will only be transmitted if Symbol Data Output ( “Symbol
Data Output” on page 6-3 ) is set to Match, Mismatch or Good Read.
Noread Message can be set to any ASCII characters except NULL <> and , (comma).
Usage: Used in applications where the host needs serial verification that a sym-
bol has not been read and especially useful in new print verification.
Definition: When enabled, and if no symbol has been decoded before timeout or the
end of the read cycle, the noread message will be transmitted to the
host.
Serial Cmd: < Kkstatus , message>
Default: MISSING
Options: Up to seven ASCII characters (except NUL)
Serial Cmd: < Kkstatus ,message>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
Definition: Any combination of ASCII characters can be defined as the noread
message.
Serial Cmd:
<
Kk status, message
>
Default: NOREAD
Options: 0 to 7 ASCII characters.