Microscan MS-710, User Manual, Page: 90 / 186

I/O Parameters by ESP
6-2
MS-710 Scanner User’s Manual
6–I
/0 Param
e
te
rs I/O Parameters by ESP
I/O Parameters by Serial Command
Command Title Format
Symbol Data Output < Kl symbol data output mode,when to output>
Noread Message < Kk status,message>
Bad Symbol Message < KM status,message>
No Symbol Message < KN status,message>
No Object Message
a
a. For MS-710s with MS-Sensors.
< KO status,message>
Laser ON/OFF Status < KC laser on/off status>
Beeper < Ku status
,
volume>
Partial Output < KY status,start postion,length>
Serial Verification < KS command echo status,beep status,control/hex output>
Output 1 <
Kv output on,active state,pulse width,number to output on>
Output 2 < Kw output on,active state,pulse width,number to output on>
Output 3 < K‘ output on,active state,pulse width,number to output on>
Click this button to
bring up the I/O
Parameters menu.
To change a setting,
double-click the
setting and use your
cursor to scroll
through the options.