Microscan MS-710, User Manual, Page: 8 / 186

viii
MS-710 Scanner User’s Manual
List of Tables
Table 9-1 Summary of Utility Serial Commands ........................................ 9-3
Table 9-2 Hex Value to Binary Conversion .............................................. 9-17
Table 9-3 Scanner Status ........................................................................ 9-17
Table A-1 MS-710 Status Lights ................................................................ A-3
Table A-1 MS-710 Host Connector, 15-pin ................................................ A-5
Table A-2 6-pin Trigger Connector .......................................................... A-10
Table A-3 15-pin Scanner Connector ...................................................... A-10
Table A-4 5-pin Power Connector ........................................................... A-10
Table A-5 25-pin D-sub Host Connector .................................................. A-10
Table A-6 6-pin LAN (RJ11) Connector ................................................... A-10
Table A-7 Complete List of Serial Configuration Commands .................. A-11
Table A-8 ASCII Table with Control Characters ...................................... A-17
Table A-9 Communication Protocol Commands ...................................... A-18
Table A-10 Multidrop Addresses ............................................................. A-33
About the MS-710 Scanner
The MS-710 is a programmable, fixed-mount, high-speed scanner that reads and
decodes a wide variety of bar code symbols using a 10-sided spinning mirror to
project laser beams over a wide scan angle.
A user interface program, the ESP (Easy Setup Program), can be downloaded from our
web site ( www.microscan.com ) and runs on Windows 2000 or Windows XP operating systems.
Alternately, configuration commands can be sent from an embedded, menu-driven terminal
program, or directly by host serial command strings.