Microscan MS-710, User Manual, Page: 105 / 186

Chapter 6 I/0 Parameters
MS-710 Scanner User’s Manual
6-17
6–I
/0 Param
e
te
rs
Polarity
Pulse Width
Number to Output On
Note: The number of matches, etc. for this setting does not need to be sequential.
Definition: Sets the polarity of the discrete output.
Serial Cmd: < Kv output on, polarity ,pulse width,number to output on>
Default: Negative
Options: 0 = Negative 1 = Positive
Definition: Sets the time in 10 mS increments that the discrete output remains active.
Serial Cmd:
<
Kv output on,polarity, pulse width
,
number to output on>
Default: 5 (.05 seconds). Corresponds to 50 mS displayed in the menu.
Options: 1 to 255 (0.01 to 2.55 seconds). Divide the number entered on the com-
mand line by 100 for time in seconds.
Definition: Sets the number of events (matches, mismatches, noreads, etc. as con-
figured by Output On) that must occur before activating the associated
output.
Serial Cmd: < Kv output on,polarity,pulse width, number to output on >
Default: 1
Options: 0 to 255